Stans Rim tape/Strip 27mmx10M Yellow

Stan's yellow rim tape is a top - notch choice for tubeless - ready wheels. It forms a strong, airtight seal over spoke holes. Its non - porous vapor barrier effectively keeps moisture out of the rim interior. The natural gum rubber adhesive sticks precisely where you need it and leaves no mess.

If your tire inflation pressure is 45psi or less, just one layer of this yellow tape over the spoke holes is enough. For road tubeless and similar high - pressure tires (over 45psi), double - wrap the tape. Each roll is about 9.14 meters long.

Here are the size recommendations: Use the 21mm tape for rims with an internal width of 19 - 21mm, the 25mm tape for 23 - 25mm internal width rims, the 27mm tape for 25 - 27mm internal width rims, and the 30mm tape for 28 - 30mm internal width rims.

Using Stan's yellow rim tape is easy. First, make sure your rim is clean. If your tire needs 45psi or less of inflation pressure, apply one layer of the tape over the spoke holes. For tires that need more than 45psi, like road tubeless ones, double - wrap the tape around the spoke holes. Remember, each roll is about 9.14 meters long, so plan accordingly.

When it comes to sizing, pick the right tape width for your rim's internal width. Use the 21mm tape for 19 - 21mm internal width rims, 25mm for 23 - 25mm, 27mm for 25 - 27mm, and 30mm for 28 - 30mm.

As for maintenance, keep the tape away from sharp objects to prevent cuts. If you need to remove the tape, it won't leave any residue, but be gentle to avoid damaging the rim. Check the seal regularly, especially after long rides or if you notice any air leakage.