Stan's yellow rim tape is an ideal choice for tubeless - ready wheels. It offers a long - lasting, airtight seal over spoke holes. The non - porous vapor barrier effectively keeps moisture out of the rim interior. Its natural gum rubber adhesive sticks precisely where you need it and leaves no mess behind. For tires inflated to 45psi or less, a single layer of this yellow tape over the spoke holes is sufficient. For road tubeless and similar tires requiring over 45psi, double - wrapping the tape is necessary. Each roll is 9.14 meters long. Sizes and compatibility: Stan's 21mm rim tape suits rims with an internal width of 19 - 21mm. The 25mm tape is for rims with a 23 - 25mm internal width. The 27mm tape is recommended for rims with a 25 - 27mm internal width, and the 30mm tape is perfect for rims with a 28 - 30mm internal width.
Using this rim tape is easy. First, check the internal width of your rim and choose the right size of tape. For tires that need 45psi or less, just put one layer of the tape over the spoke holes of your rim. If your tire requires more than 45psi, wrap the tape around the spoke holes twice. When applying the tape, make sure it sticks firmly and smoothly. Avoid stretching the tape too much as it may affect the seal. As for maintenance, keep the tape clean and dry. If you notice any signs of wear or if the seal seems to be weakening, it's a good idea to replace the tape. This will ensure your tubeless - ready wheels continue to work well.
