Topeak Guard Tetrafender M1 & M2 Set

This Topeak Guard Tetrafender M1 & M2 Set is a must - have for mountain bike enthusiasts. It's compatible with all frame materials and finishes. ### TETRAFENDER M1 The M1 is a great quick - mount front fender with a dual - color design. You can easily and securely attach it to MTB forks using hook and loop straps. The adjustable aluminum struts make it fit the tire closely, providing excellent protection against mud and spray. The highly polished underside stops dirt from building up and makes cleaning a breeze. - **Fork Compatibility**: Front fork width ranges from 115 - 145mm. - **Wheel and Tire**: It suits 26' - 29' wheel sizes with tire widths up to 2.8". - **Mounting System**: Features a quick - mount strap system. - **Adjustability**: You can adjust the angle, and the aluminum struts ensure good tire coverage. - **Specs**: Made of two - tone injected high - impact resistant plastic with aluminum struts. It measures 48 x 17.2 x 14.2 cm (18.9” x 6.8” x 5.6”) and weighs 230 g (8.11 oz). It attaches to the fork with hook and loop straps. ### TETRAFENDER M2 The M2 is a perfect quick - mount rear fender system. It attaches to the MTB securely using hook and loop straps. The adjustable fender length allows for a close fit to the tire and offers great mud and spray protection. Its unique two - piece, dual - tone design gives you options for short or long fender use according to your riding conditions. The polished underside is easy to clean and resists dirt. - **Seatstay Compatibility**: Seatstays width should be within 95 - 125mm. - **Wheel and Tire**: Compatible with 26” - 29” wheel sizes and tire widths up to 2.8". - **Design Advantage**: The two - piece adjustable design offers short and long fender options for different riding scenarios, like long fenders for rainy and muddy rides and short fenders for dry and dusty conditions. - **Mounting and Adjustment**: It has a quick - mount strap system. You can adjust the angle, with a maximum 3.2 cm adjustable fender length, and the aluminum struts ensure good tire coverage. - **Specs**: Constructed from two - tone injected high - impact resistant plastic with aluminum struts. It measures 49.8 x 32.4 x 14.2 cm (19.4” x 12.8” x 5.6”) and weighs 360 g (12.70 oz). It attaches to the seatstays with hook and loop straps.

### How to Use - **TETRAFENDER M1**: First, check that your front fork width is between 115 - 145mm. Then, use the hook and loop straps to attach the fender to the fork. You can adjust the angle of the fender using the aluminum struts to ensure good tire coverage. - **TETRAFENDER M2**: Make sure your seatstays width is within 95 - 125mm. Attach the fender to the seatstays with the hook and loop straps. Decide whether to use the short or long fender based on your riding conditions and adjust the fender length as needed. ### Notes - Before installation, double - check the compatibility of your bike with the fenders, especially the fork width for M1 and seatstays width for M2. - When adjusting the fenders, don't over - tighten the straps to avoid damaging the frame or the fenders. ### Maintenance - After each ride, especially in muddy or wet conditions, clean the fenders. The highly polished underside makes it easy to wipe off dirt. - Periodically check the hook and loop straps for wear and tear. If they start to lose their grip, consider replacing them. - Store the fenders in a dry place when not in use to prevent damage from moisture.