The Quad Lock 360 Flexible Adhesive Base is a great choice for mounting on flat or curved surfaces. It uses a super - secure 3M Adhesive for a strong grip. With 4 bendable tabs, it can easily adapt to curved surfaces. The base comes with a 10mm spacer and two screws (1 x M5x30 and 1 x M5x45) to connect to a Quad Lock 360 HEAD or ARM. Made of tough nylon, it measures 60mm x 60mm with a height of 18.3mm. Each 28mm - wide tab has 2 grooves for easy bending, allowing it to grip both concave and convex surfaces. It's compatible with all Quad Lock 360 ARMs and HEADs. This base can be attached to various flat and curved surfaces, but not severely curved ones. The 3M™ VHB Adhesive works well on smooth, non - textured, non - porous surfaces like un - coated glass, plastics, metals, fibreglass, and sealed wood. Recommended for use in cars, boats, caravans, and low - vibration elements. Not suitable for rubber, leather, silicone, soft - touch coatings, low - surface - energy plastics, and unsealed wood. Also, it's not recommended for high - vibration vehicles like motorcycles, scooters, and ATVs. Make sure to clean and dry the surface before applying, and note that the 3M™ VHB™ tape is single - use and should not obstruct vehicle safety features.
Using the Quad Lock 360 Flexible Adhesive Base is easy. First, pick a flat or gently curved surface that's smooth, non - textured, and non - porous. Clean and dry the surface thoroughly. Then, decide where you want to place the base. Remember, it's not for severely curved surfaces. If you're using it in a vehicle, make sure it doesn't block safety features like airbags. Take the base and use the 4 bendable tabs to fit it to the surface shape. You can bend them along the grooves to match concave or convex surfaces. Once you've placed the base, press it firmly onto the surface. If you need to connect it to a Quad Lock 360 HEAD or ARM, use the 10mm spacer and the provided screws. When it comes to maintenance, there's not much to do. Just keep it clean. Avoid using it on high - vibration vehicles like motorcycles and scooters. Also, since the 3M™ VHB™ tape is single - use, once you've stuck it down, you can't reuse it. So, plan your placement carefully.
